|
Don't Tee me Off™ is the perfect
gift idea for the golfer in everyone's life
as the wooden brain buster has to be unlocked before their balls
can fall free.
This may involve turning, flipping and rotating the gizmo.
|
|
Not thrown, we repeat, Not
thrown!
 |
|
To install
the golf balls:
It is important to be precise and
gentle when executing the following movements.
note: listen for the pins to drop!
-
Place Tee J in the top
hole. Position
Ball A.
-
Pull Tee J tightly up
against Ball A. Holding firmly, turn the puzzle
upside down until the pin drops.
Note: slight force may be required.
Ball A is now locked into position.
-
Keeping the puzzle upside down,
place Tee K in the middle hole.
-
Turn the puzzle upright, push
Tee K in, and place Ball B into position.
-
Pull Tee K tightly up
against Ball B
and turn the puzzle upside down until
the pin drops.
Note: slight force may be required.
Ball B is now locked into position.
-
Keeping the puzzle upside down,
push Tee L into the remaining hole as far
as it will go. Return the puzzle to its
upright position.
|
7. Holding, not pushing Tee L in
place, slowly tilt the puzzle to the left or to the right so that it is
horizontal. Do not pass the horizontal position when tilting. (Diagram
B) Shake gently and return the puzzle to its upright vertical position.
(Diagram A)
Note: guessing which way to tilt it is the key to the solution!
8. With the balls facing you, tilt the
puzzle towards you so that the balls are parallel to the ground.
(Diagram C) Do not tilt more than parallel.
9. Return the puzzle to its upright
vertical position and push in Tee L. Place
Ball C into position.
Pull Tee L up against Ball C and turn the puzzle upside
down.
Shake gently and return to its upright position, locking Ball C
into place
To remove the golf
balls:
Again, it is important to be precise and
gentle when executing the following steps. It requires patience and
skill to solve it on your first try. So don't get tee'd off, keep
trying.
-
Hold the puzzle in an upright vertical
position so that the front of the puzzle, or balls, are facing you.
(Diagram A)
-
Slowly tilt the puzzle to the left or
to the right so that it is horizontal. Do not pass the horizontal
position when tilting. (Diagram B)Shake gently and return the puzzle
to its upright vertical position. (Diagram A)
Note: guessing which way to tilt it is the key to the solution!
-
With the balls still facing you, tilt
the puzzle towards you so that the balls are parallel to the ground.
(Diagram C). Do not tilt more than parallel. Return the puzzle to
its upright vertical position.
-
Jiggle and push in Tee L to
release Ball C.
Note: do not force the tee. if it does not push in easily, repeat
steps 1 through 3.
-
Remove Tee L from the hole.
Jiggle and push in Tee K to remove Ball B.
Repeat this step to remove Tee J and Ball A.
Please note: Often the humidity
level in the atmosphere causes the wood to swell thereby causing the
mechanism to block.
|
